This post walks through each step clearly — from setup to bonus rounds — without the fluff.

Introduction to the Campaign

Echo Protocol’s airdrop campaign is live on OKX Cryptopedia. There are five primary tasks and two social tasks. To be eligible for rewards, all interactions must be done using the OKX Web3 Wallet.

Start here: OKX Cryptopedia – Echo Protocol Event

Before starting, make sure you have at least $11 worth of APT (Aptos), as you’ll need it to complete the required transactions. If you don’t hold APT, the easiest way to get some is by bridging it using RocketX Exchange from any L1 or L2 like Base.

Step-by-Step Task Guide for the Echo Protocol Cryptopedia

1. Initial Setup

First, connect your OKX Web3 Wallet and complete the required social tasks:

• Link your Twitter account
• Follow Echo Protocol on Twitter
• Join the Echo Protocol Discord

These are standard verification tasks to get you into the system.

2. Swap APT to xBTC

Go to Hyperion Swap and swap a small amount of APT (0.00001 is enough) into xBTC.

3. Lend and Withdraw xBTC

Visit OKX xBTC Lending.

• Deposit your xBTC
• Verify the task on Cryptopedia
• Withdraw your xBTC afterward

4. Deposit xBTC into the Echo Vault

Head to Echo Vault and deposit your xBTC into the Aptos Vault. You’ll automatically receive aBTC in return.

5. Lend and Withdraw aBTC

Visit the aBTC Lending Page.

• Deposit aBTC
• Verify the task
• Withdraw after it’s complete

6. Supply aBTC to Aries Markets

Go to Aries aBTC Market and supply your aBTC. After verifying the task, you can withdraw it immediately.

Bonus: Hold for Extra Rewards

If you leave your xBTC in the Echo Vault for more than five days, you’ll be eligible for a bonus lucky draw. Optional, but could pay off.

NEKO ODYSSEY Campaign: What’s Next

Echo Protocol launched a follow-up campaign called NEKO ODYSSEY. If you completed the previous tasks, you’re already ahead with 50 starting points.

Start here:
Echo Vault – Neko Campaign

How to Participate:

1. Connect your OKX Wallet (Aptos network)
2. Go to the “Airdrop” tab and select “Neko Life”
3. Complete additional social tasks for more points
4. Optionally deposit more xBTC for bonus multipliers

Tips:

• You can withdraw your old xBTC if you’re done with the Cryptopedia tasks
• Daily/weekly tasks may rotate — check in regularly
• APY and new campaign partners might bring more stacking opportunities

Join: LiveArt Airdrop – Earn $ART Points Daily

The total reward pool for this airdrop is worth 15 million $LSK tokens, approximately $20 million.

LISK is already listed on Tier 1 exchanges like Binance and KuCoin.

LISK is an older project, and I have been following it because there are only a few long-standing crypto projects in the market that are still actively working and evolving.

As we can see, only 34,000 participants are onboard so far. Join early to maximize your benefit (XP).

Steps to Participate:

1. Register:
   • Visit the Lisk Airdrop Portal.
   • Connect your Zerion EVM wallet (their ecosystem partner).
   • Click on “Switch to LISK.”

2. Verify your profile with Guild:

Go to the Lisk Guild.
Connect your Twitter, Discord, or other social accounts if you’re new to the guild—there’s no need to mint a guild pin.

Then, complete two tasks to claim both the airdrop and the follower role. Afterward, return to the airdrop portal page.

3. Apply referral code: GYZpD4 and continue.

Prepare at least $10 and bridge to the LISK Chain via the relay.link bridge from any L2(a fee of just 1 cent).

Swap into $2 worth of LSK, 1 USDT, and 1 USDC, and hold them.

Use partner DEX platforms like Oku.trade or Velodrome.Finance for extra rewards.

XP Earning Plans and Total Points

Daily Visit Rewards

• Visit Lisk Portal daily: +10 pts per day
  Total possible points: 70 pts (weekly cap)

Social Media Rewards

1. Follow Lisk on X and Discord: +100 pts
2. Gitcoin Passport (min Humanity Score 13): +300 pts
   Total possible points: 400 pts

Transaction-Based Rewards

1. 1 transaction per day: +10 pts (daily)
2. 1 transaction daily for 7 days: +50 pts (weekly streak)
3. 1 transaction daily for 30 days: +200 pts (monthly streak)
   Total possible points: 260 pts

Balance-Based(Any amount) Rewards

1. Hold ETH: +50 pts
2. Hold LSK: +50 pts
3. Hold USDC: +50 pts
4. Hold USDT: +50 pts
5. Hold Lisk of Life NFT: +500 pts
   Total possible points: 700 pts

Gas Expenditure Rewards

• On-chain activity: +1 pt per activity, up to 500 pts per week
  Total possible points: 500 pts (weekly cap)

External Tasks

1. Become verified on Fonbnk: +300 pts
2. Become verified on Xellar: +300 pts
   Total possible points: 600 pts

Grand Total Possible Points

Overall Total in a month: 2530 pts or, 1430 pts(Without NFT and External Tasks)

Daily/Weekly Activities: 260 + 700 + 500 + 70 = 1530 pts

External Tasks and Social Media: 600 + 400 = 1000 pts

More super tasks are coming from these partner platforms, offering extra payouts every 2 weeks.

Feel free to ask anything. Join our Telegram Channel to get the latest announcements or rewards for this project. You can also join us on the TG chat to discuss the airdrop or ask any questions.

Join: LiveArt Airdrop – Earn 750 Points Daily

Glacier Network builds scalable blockchain infrastructure for AI and DePIN, with seamless data management via GlacierDB, GlacierAI, and off-chain computation through GlacierDA.

The Network has launched its Verifier Nodes on testnet, a pivotal step toward validating and refining its data-centric blockchain infrastructure. These nodes play a crucial role in testing components like Glacier Consensus, GlacierAI, GlacierDB, and GlacierDA, ensuring seamless decentralized data management and AI performance.

Reward

Run a Glacier Verifier Test Node to secure $GLS rewards, points, and early sale whitelist access.

Funding

Total raised $10.9m in two rounds.

Glacier Verifier Node Installation

Step 1: VPS Setup

If you are running either a Nillion Verifier Node or Nesa Miner Node, you can run this verifier Node on the same VPS. The requirements are minimal since this is a light node.

Node Hardware Requirements(minimum):

• CPU: Single Core
• RAM: 2 GB (4 GB+ recommended).
• Storage: Less than 100 MB.
• Bandwidth: Stable Internet Connection
• Operating Systems: Linux

Alternatively, I recommend using this VPS for $5.5: VPS Link.

2. Open Termius Application

1. Open the Termius application on your PC or phone. You can download the app from the Microsoft Store or Google Play Store for free. Create a free account using your email.
2. Input the following details:

• Host: Your VPS IP
• Label: Glacier
• Username: root
• Password: Your VPS Password

Save and connect to the VPS.

Note: If you are new to Termius, on a PC, to copy, press Ctrl + Shift + C, and to paste, press Ctrl + Shift + V.

Step 3. Prepare Private Key and tBNB for Gas

If you don’t have tBNB tokens or a wallet:

• Create a Wallet: Use MetaMask or another compatible wallet.
• Connect to OpBNB Testnet: Add OpBNB Testnet RPC to your wallet from ChainList
• Obtain tBNB: Use a faucet and transfer tBNB to your wallet:

1. Join the BNB Chain Discord
2. Visit the BNB Chain Discord faucet channel
3. Type /faucet {your receiver account} and sent.
4. You will receive 0.3 tBNB in few seconds.
5. Bridge BNB Testnet to opBNB Tetnet Network via the Official Bridge

• Export Private Key: Export the private key from your wallet.

Keep the private key secure; you will need it to run the node.

———————————-

Node Licensing

The first time your node goes online, it will automatically mint a Node License NFT on the OpBNB Testnet. This process can take several minutes, so be patient.

You can check this transaction on the opBNB chain explorer

I deleted the Docker version because I was facing some issues.

CLI Version

Step 4: Prepare Your Environment

• Update Your System:

sudo apt-get update &&
sudo apt-get upgrade -y

• Install Required Utilities:

sudo apt-get install -y screen curl wget

Step 5: Setup a Screen session

• Start a screen session:

screen -S glacier-node

• Create and navigate to a directory:

mkdir gla && cd gla

Step 6. Download Node Binary

• Download the node binary:

wget https://github.com/Glacier-Labs/node-bootstrap/releases/download/v0.0.2-beta/verifier_linux_amd64 -O verifier_linux_amd64

• Make the binary executable:

chmod +x verifier_linux_amd64

Step 7: Download and Configure config.yaml

• Download the configuration template:

wget https://glacier-labs.github.io/node-bootstrap/config.yaml

• Edit the configuration file to add your private key:

nano config.yaml

Replace YourPrivateKey with your actual private key. The updated file should look like this:

Save and exit (Ctrl+O, Enter, Ctrl+X).

Step 8: Run the Node

./verifier_linux_amd64

To Detach the session: Press Ctrl + A + D

To reattach the session later:

screen -r glacier-node

Step 9. Verify Node Status

• Check the online status of your node on the Node Explorer:
  Node Explorer

Go to the Node Explorer page, connect your wallet, and click on the wallet address in the top right. You can then check how many tasks the node is verifying.

——————————————

Additional Resources

• NodeCtrl Contract: View on OpBNB Testnet
• License NFT Contract: View on OpBNB Testnet

————””””””””””””””————

If you’re having any issues, you should contact them on Discord or ping me in the TG Group. I’ll help if I can.

And to receive upcoming updates about node upgrades or reward announcements, please join our Telegram channel and keep notifications unmuted.

————……………………————

To update your Glacier Verifier Node to the latest version (v0.0.2-beta), follow these steps:

Step 1: Stop the Current Node

1. If the node is running, stop it:
   • Reattach the session:

screen -r glacier-node

Then stop the node with Ctrl+C

Step 2: Backup Your Configuration

Before proceeding, back up your config.yaml file to ensure you don’t lose your private key or settings:

cp config.yaml config_backup.yaml

Step 3: Download the Latest Node Binary

• Navigate to your node’s directory:

cd gla

• Download the latest version of the binary:

wget https://github.com/Glacier-Labs/node-bootstrap/releases/download/v0.0.2-beta/verifier_linux_amd64 -O verifier_linux_amd64

The -O flag overwrites the existing binary with the latest one.

• Make the new binary executable:

chmod +x verifier_linux_amd64

Step 4: Verify Your Configuration

Ensure your config.yaml is still present and contains the correct private key and settings. If necessary, restore it from the backup:

cp config_backup.yaml config.yaml

Step 5: Run the Updated Node

• Start the updated node:

./verifier_linux_amd64

To Detach the session: Press Ctrl + A + D

To reattach the session later:

screen -r glacier-node

Cysic Network is a decentralized platform focused on scaling Zero-Knowledge proof generation and verification. Phase II builds on the success of Phase I, advancing decentralization and expanding the network’s capabilities.

The introduction of the Genesis Node marks a key milestone, offering early supporters a chance to be part of this next phase.

Reward Details

Earn $CYS and $CGT testnet tokens for your participation, which can be converted after the mainnet launch.

Check your rewards and contributions in the “My Page” section on the Cysic dashboard.

Funding Raised by Cysic

Cysic raised a total of $18M in two rounds, with investors including HashKey Capital, OKX Ventures, ABCDE Capital, SNZ Holding, and Polychain.

Cysic Testnet Light Node Installation

Step 1: VPS Setup

If you are running a Glacier Testnet Verifier Node, you can run this verifier Node on the same VPS. The requirements are minimal since this is a light node.

Node Hardware Requirements(minimum):

• CPU: Single Core
• RAM: 512 MB [Initially, they recommended having 8 GB of RAM. I personally faced an issue(details below) even though I had 3 GB of free RAM]
• Storage: 1 SSD
• Bandwidth: Stable Internet Connection
• Supported Operating Systems: Windows, Linux, Mac

Alternatively, I recommend using this VPS for $5.5: VPS Link. or a slightly higher config for $12.50: VPS Link. This way, you can run multiple nodes on the same VPS.

—————

1.1. Open Termius Application

1. Open the Termius application on your PC or phone. You can download the app from the Microsoft Store or Google Play Store for free. Create a free account using your email.
2. Input the following details:

• Host: Your VPS IP
• Label: Cysic
• Username: root
• Password: Your VPS Password

Save and connect to the VPS.

Note: If you are new to Termius, on a PC, to copy, press Ctrl + Shift + C, and to paste, press Ctrl + Shift + V.

Step 2: Registration

Phase I participants are automatically migrated to Phase II, but if you are joining as a fresher, you need to register your wallet first.

For this, you need an invite code to enter. Below, you’ll find a code. If it doesn’t work, please visit the Cysic Discord invite channel and grab one for yourself.

5EDA6

After entering the invite code , connect your mertamask wallet, and go to the installation process. You won’t need to get faucet to run a verifier node.

Installation

Step 3: Prepare Your Environment

• Update Your System:

sudo apt-get update &&
sudo apt-get upgrade -y

• Install Required Utilities:

sudo apt-get install -y screen curl wget

Step 4: Setup a Screen session

• Start a screen session:

screen -S cysic

Step 5: Download and Setup the Verifier

Run the following command in the terminal. Replace 0x-Fill-in-your-reward-address-here with your actual reward address.

curl -L https://github.com/cysic-labs/phase2_libs/releases/download/v1.0.0/setup_linux.sh > ~/setup_linux.sh && bash ~/setup_linux.sh 0x-Fill-in-your-reward-address-here

What this command does:

• Downloads the verifier program and libraries (verifier and libdarwin_verifier.so).
• Creates the configuration file config.toml.
• Sets up the script to run the verifier (start.sh).

Step 6: After completion, navigate to the verifier folder using:

cd ~/cysic-verifier

Step 7: Start the Verifier

Run the following command to start the verifier:

bash start.sh

The verifier might take a few minutes to establish a connection to the blockchain. During this time, you may see an error like err: rpc error. This is normal; wait a few minutes.

Also, if you are getting an error like the one below, don’t worry—it will connect to the chain shortly.

2024/11/20 07:38:59 error when get verifier from chain, verifier: 0x997F04D4E2D7cB15e3Fccc63715DA915Fd77A926, err: can’t found verifier
2024/11/20 07:38:59 error when get verifier id, err: can’t found verifier

Once connected, you should see a message like “start sync data from server”, indicating the verifier is running successfully.

To Detach the session: Press Ctrl + A + D

To reattach the session later:

screen -r cysic

—

Reconnecting the Verifier

If you need to reconnect in the future, repeat Step 6 & 7 (cd ~/cysic-verifier && bash start.sh).

On the dashboard, you can see your assigned tasks and rewards once the verifier node completes the task.

Errors:

If you see the “killed” error like below image after completing the syncing, it means your system RAM is lower than the required amount.

So, either you can stop running your node or migrate it to a different VPS.

For this, you need to install the node again on the new VPS. However, after trying to run it, you will get an error saying the node is already registered with a key.

To resolve this issue, copy the old VPS key folder to the new VPS. Follow the instructions below to proceed:

The keys folder is located under the /root/.cysic directory.

• Delete the keys folder from the new VPS:

Run the following command on your new VPS to remove the existing keys folder:

sudo rm -rf /root/.cysic/keys

• Copy the keys folder from the old VPS to the new VPS:

Run this command on your old VPS (replace <destination-vps-ip> with the new VPS IP):

scp -r /root/.cysic/keys root@<destination-vps-ip>:/root/.cysic/

Enter the password:
After running the above command, it will prompt you for the password of your new VPS. Paste it and press Enter.

Complete the process:
That’s it! Now proceed with steps 6 and 7 to turn on your node on the new VPS.

————””””””””””””””————

If you’re having any issues, you should contact them on Discord or ping me in the TG Group. I’ll help if I can.

And to receive upcoming updates about node upgrades or reward announcements, please join our Telegram channel and keep notifications unmuted.

————……………………————

Step-by-step guide to update your Cysic Node:

Before updating, it’s crucial to back up the key file. Losing the key file means losing access to your node.

The key file is located in /root/.cysic/keys/. You can copy it to a directory in your home folder (e.g., ~/MyFiles) for safekeeping.

• Verify the .key File Location:

ls /root/.cysic/keys/

Confirm the .key file exists. For example, it might be named 0xeFe0000000000000000000000000000000058.key

• Create the MyFiles Directory:

mkdir -p ~/MyFiles

• Copy the .key File: Use the cp command to copy the file:

cp /root/.cysic/keys/ 0xeFe0000000000000000000000000000000058.key ~/MyFiles/

• Verify the Copy: Check the MyFiles directory to confirm the file is there:

ls ~/MyFiles/

Now start updating…

Re-attach the screen session:

screen -r cysic

Step 1: Remove the Outdated File

Navigate to the cysic-verifier directory:

cd ~/cysic-verifier

Delete the old database file:

rm -f data/cysic-verifier.db

Exit the directory:

cd ..

Step 2: Download the Latest Version

Run the setup script to update the verifier:

curl -L https://github.com/cysic-labs/phase2_libs/releases/download/v1.0.0/setup_linux.sh > ~/setup_linux.sh
bash ~/setup_linux.sh 0x-<Your-Reward-Address>

Replace <Your-Reward-Address> with your actual wallet address.

Step 3: Restart Your Node

Start your verifier:

cd ~/cysic-verifier

bash start.sh

To Detach the session: Press Ctrl + A + D

To reattach the session later:

screen -r cysic

Early verifiers will have the opportunity to be acknowledged for their contributions, setting themselves apart in the community. They haven’t confirmed anything yet but hinted at potential future rewards.

Nillion raises over $20 million to build new web3 infrastructure.

There are two ways you can join: uploading secrets or running a verifier node (Windows/Linux/Mac).

How to start the Nillion Testnet Verifier Program?

Keplr Wallet:

• Download Keplr Wallet Extension on browser and create a new wallet if you don’t have one.
• Visit Keplr Chains.

• Search for “Nillion” and add it to Keplr. Approve the request.
• Open your Keplr Wallet, click on the menu, select “Manage Chain,” search for “Nillion,” check it, save, and then copy your Nillion Testnet address.
• Go to the faucet page, paste your Nillion Testnet address, and claim the faucet token.

1. Verifier Program:

• Visit the Verifier page.

• Choose “Secret.”
• Upload a hand palm image (you can generate one via AI or find one online if you prefer not to submit your own data).
• Submit your Nillion Testnet wallet address.

2. Running a Verifier Node:

• Go back and select “Verifier” if you want to run a verifier node and follow the on-page instructions.
• You can also watch the official guide video for more details.

If you want to run the node on a VPS, I recommend this one: https://www.anrdoezrs.net/click-101185276-13796470

If you’re having trouble, join the official Nillion Discord and ask for help, or ping me in the chat.

If you see that ‘Registration’ is true and the numbers are increasing in the secret store found, you’re good to go. But if you see ‘Registration’ is false, wait 1 or 2 hours, then restart your Docker and re-run the 7th command using the latest block height.

Check the latest block height on the Nillion Explorer.

Update: 25/09/2024

The video is 3 weeks old and may not mention the 8th step, so run the command:

nano nillion/verifier/credentials.json

Copy the wallet private key and other details, and store them in a safe place.

Press CTRL +X to exit the editor.

If you made any accidental changes to the file, you’ll be asked if you want to save them. Press N to avoid saving any changes

• LiveArt Airdrop – Earn Daily Points for Airdrop

Nesa.ai, a financial software company specializing in privacy-preserving blockchain-based platforms for artificial intelligence, has secured funding from prominent venture capital investors.

Among its key backers are Binance Labs and MH Ventures, both of which hold minority stakes in the company. Specific funding amounts have not been publicly disclosed.

They launched the miner node program in September 2024. Participate now and earn Nesa Points(NP), which will be transformed into token in future. Early adopters will reap the most rewards.

Campaign Duration: September 13th — October 13th

You do not need to be whitelisted to run a miner node. Anyone can participate as a miner on the Nesa network.

Node Hardware Requirements:

• CPU: 2 CPU Cores (x86/X64 Processor)
• RAM: 4 GB
• Storage: 50 GB SSD
• Bandwidth: Stable Internet Connection

You can install this node on the same VPS if you are running the Elixir Validator Node by following my Elixir Node installation guide.

Alternatively, I recommend using this VPS for $5.5: VPS Link. This way, you can run both Elixir and Nesa on the same VPS.

We need to complete some prerequisites before starting the node installation.

Step 1. HuggingFace API Key (User Access Token)

• Sign up on HuggingFace: Go to HuggingFace and sign up for a free account.
• Get API Key: After signing in, go to your profile icon (top right), click Settings → Access Tokens → Create New Token. Save the token as you’ll need it later.

Step 2. Leap Wallet Installation and Private Key Export

• Install Leap Wallet: Visit Leap Wallet and download the wallet for your operating system.
• Create/Import Wallet: Set up a new wallet.
• Export Private Key:
  • Open your Leap Wallet and click on the hamburger icon (three horizontal lines) to open the menu bar.
  • Scroll down and click on the Export Private Key option. Then, copy the private key and save it securely.

Step-by-Step Guide to Running a Nesa Miner Node:

Step 1: Open Termius Application

1. Open the Termius application on your PC or phone. You can download the app from the Microsoft Store or Google Play Store for free. Create a free account using your email.
2. Input the following details:

• Host: Your VPS IP
• Label: Nesa
• Username: root
• Password: Your VPS Password

Save and connect to the VPS.

Note: If you are new to Termius, on a PC, to copy, select and press Ctrl + Shift + C, and to paste, press Ctrl + Shift + V.

Step 2:

I) Install cURL and jq

sudo apt update && sudo apt install curl && apt install jq -y

II) Install Docker (Skip if already installed)

If you’ve already installed Docker, you can skip this step. For completeness, here are the commands:

sudo apt-get update
sudo apt-get install -y ca-certificates curl
sudo install -m 0755 -d /etc/apt/keyrings
sudo curl -fsSL https://download.docker.com/linux/ubuntu/gpg -o /etc/apt/keyrings/docker.asc
sudo chmod a+r /etc/apt/keyrings/docker.asc

echo \
  "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.asc] https://download.docker.com/linux/ubuntu \
  $(. /etc/os-release && echo \"$VERSION_CODENAME\") stable" | \
  sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt-get update
sudo apt-get install -y docker-ce docker-ce-cli containerd.io docker-buildx-plugin docker-compose-plugin

docker --version

III) Installation Command

bash <(curl -s https://raw.githubusercontent.com/nesaorg/bootstrap/master/bootstrap.sh)

Follow the Wizard for Setup

• 1. Wizardy (Quick Setup): Choose the “Wizardy” option for an automatic configuration. Just Press Enter.

• 2. Moniker (Node Name): You will be prompted to enter a name for your node. This is the identifier for your node on the network.

• 3. Email: Enter your email address to associate your node with your account.

• 4. Referral Code (enter it here for bonus points): nesa18u8s52tx3ecnx84s4ldm4jxxuxt0jetzqaees5

• 4. Enter HuggingFace API Key

During the setup, you’ll also be prompted to provide your HuggingFace API key. Enter the token you obtained from HuggingFace earlier.

• 5. Enter Private Key: Enter the private key when prompted in the setup.

• 6. Start Node: Type y

After all details are entered, confirm the configuration by selecting Yes when asked to start the node.

The setup should now complete, and your node will start running based on the selected configuration.

To check node logs, run commands:

docker logs -f orchestrator

Solution for the Port Conflict error

If you are seeing this, it means the 8080 port is already being used by another service.

We will use a different port for Nesa to avoid interrupting other running services.

Run the following commands to check running containers:

1. Check Running Containers:

   docker ps

Copy the container ID and stop both container one by one with this command:

   docker stop container_id

2. Change the Port: Run this command to change the port from 8080 to 8081:

   sed -i 's/8080:8080/8081:8080/' ~/.nesa/docker/compose.ipfs.yml

3. Restart the Node: Run the following script to restart the node:

   bash <(curl -s https://raw.githubusercontent.com/nesaorg/bootstrap/master/bootstrap.sh)

Next Steps

• To monitor your node, you can use the dashboard or tools provided by Nesa.

To retrieve your Node ID, run the following command:

cat ~/.nesa/identity/node_id.id

Copy the ID up to the ‘root’ word.

Go to the node dashboard and search for your node ID to check if it’s up or down, and to view the uptime.

• Share your Nesa wallet address (starting with “nesa”) to invite friends and earn referral bonuses.

To get your Nesa address, go to the Nesa Explorer page and connect your Leap Wallet. This will add the Nesa chain to your Leap Wallet, and you can copy the Nesa address from the explorer page.

If you’re having any issues, you should contact them on Discord or ping me in the TG Group. I’ll help if I can.

And to receive upcoming updates about node upgrades or reward announcements, please join our Telegram channel and keep notifications unmuted.

• Join LiveArt Airdrop

Given thousands of dollars in airdrops already.

The latest example is Aevo. The Aevo airdrop has been confirmed, and the Binance listing is also confirmed. The latest snapshot was taken today, on the 7th of March.

I’m here to share a few upcoming airdrop opportunities. There’s no need to complete KYC on any of these platforms.

However, trading in the futures market is always risky. That’s why I recommend trading on two platforms simultaneously.

This means that we can farm two platforms simultaneously by dividing our funds between them and opening a long position on one and a short position on the other platform.

This way, fees will be lower as well. For the detailed fee table, please refer to the bottom of this post.

Taker Fees = Market Order and Maker Fees = Limit Order fees.

Best Upcoming Perpetual DEX Airdrops

💠 Flash Trade:

We discussed Drift and Zeta Market a long time ago. They did very well by giving airdrop allocation to users. Many received many tokens for just a few dollars in fees spent.

After those two platforms, there’s only one platform likely left for a potential airdrop on the Solana chain: Flash Trade.

An airdrop is already confirmed for the token launch. In the document, they mention the token launch, with no exact date announced, but they did mention there will be an allocation for their NFT holders.

Also, community matters, so the allocation must be for traders as well.

People get Voltage Points for trading, liquidity, and referrals,

10$ of Cumulative trading — 1 Voltage Point
1$ in earned fees as LP — 50 VP
1$ in earned rebates from your referral link — 250 VP

Trading fees are 0.08%.

The NFT price is above 5 Sol.

Start Here: https://beast.flash.trade/

And for more details, please visit their documentation pages.

💠 KiloEx: The Binance-backed perpetual DEX KiloEx is the number one derivative exchange on the opBNB Blockchain. The airdrop has already been confirmed with 100 million KILO tokens.

The total number of users is above 100,000, but the number of active users is less than 15,000.

I have mentioned this name many times in my Telegram channel and participated in almost all campaigns until now. I have made $140k of volume and stacked above 5.5k points.

I have already published a detailed post on KiloEx; you must check it out if you have not joined yet.

Fee Details: Flat 0.1% of trade volume.

💠 HyperLiquid: The second PERP dex that I farm most is HyperLiquid, HyperLiquid sits in the top position in the Perpetual market among all the platforms(Source: DefiLlama).

The best part is you won’t be charged a trading fee if you open your trades through limit orders and using this code “4OFF” as the referral code you will earn a 4% rebate as a cashback on every trade.

Hyperliquid will distribute 1,000,000 points weekly for six months starting Nov 1, rewarding users contributing to the protocol.

Fee Details: (-) equal to rebates.

💠 (Airdrop Distributed)Zeta Market: As Solana started rising again, the hype around its ecosystem airdrops increased. It began with JTO (given $20k in airdrops), PYTH ($2k), BONK ($700), and many more.

There are so many projects emerging within the Solana ecosystem, including Zeta Market, Drift, Kamino, and mFi, among others.

Zeta Market has already implemented the Zeta-Score for its users. Despite Season 2 already underway, we still need to farm this one.

The Zeta-Score is based on trading volume, where $1 equals 1 point on market orders and $1 equals 5 points on limit orders.

Using the Backpack wallet to load funds into Zeta Market gives you a 1.1x Points boost.

Fee Details:

💠 (Airdrop Distributed)Drift: The platform I am looking for farming on Solana other than Zeta Market is Drift.

In this protocol, we can trade derivatives and utilize the Lend/Borrow feature to earn Drift points.

The points system was launched on January 24th, 2024, and will run for three months, providing us with enough time to accumulate points for farming the Drift airdrop.

Additionally, they mentioned that the exact points methodology will not be disclosed until the end of the program.

To date, Drift has processed over $5 billion in volume across more than 90,000 users, securing over $130 million in total value locked (TVL) with the deepest derivatives liquidity on Solana.

Trading on both Drift and Zeta Market simultaneously can help you save on fees across your overall capital.

Drift also offers rebates for limit orders, similar to HyperLiquid.

Fee Details:

💠 LogX: Since the launch of the LogX platform, there have been many chain integrations like Mode Network, Linea, Fuse, Arbitrum, etc.

And now that Orderly Network has joined LogX, we can farm both the LogX and Orderly airdrops together. If you’re not familiar with Orderly, please check out our various posts on our Telegram channel.

By depositing and trading through Orderly Network into LogX, users can earn double points.

A points snapshot was taken on March 5th. In the new reward program, users can directly earn LOGX tokens every week by trading on different chains.

Fee Details:

Here is the fee table for all five DEX at once.

Those are a few names for Perpetual DEX Airdrops that are currently trending in the market. We will continue to add more platforms in the upcoming days. Therefore, bookmark this page and start farming.

Be sure to join our Telegram channel for the latest updates.

Thank you.

They are set to launch the Superform Safari Campaign to reward protocol users. The campaign will feature several tasks over the next few weeks.

Chapter One has launched on Galxe. In this campaign, we must complete two major on-chain tasks and a few social tasks.

The Superform Lab has raised $6.5 million, led by big VCs. That’s why I’m interested in completing these tasks.

Each chapter you complete earns you special NFTs.

Let’s do it!

Superform Safari Campaign: Chapter 1

Completing this chapter isn’t so hard, but the on-chain tasks are slightly confusing. That’s why I’m writing this blog about a Galxe campaign. Lol

1. Visit the Galxe page and complete all social tasks, like following, retweeting, etc. Check the quiz answers at the end of this page.

2. To perform the on-chain task, you will need $28 worth of ETH on any L2 chains like Arbitrum, Base, or Optimism (I am using Arbitrum for the demo).

Superform same-chain >$10 Deposit Task

3. Visit https://app.superform.xyz/ and connect to Rabby Wallet. In case Rabby does not work on the website, you may use the OKX Wallet.

4. On the Explorer page, select ‘PRIME ETH‘ on Notional Finance, then click ‘DEPOSIT‘.

5. OPEN BAG

6. Click on ‘Select your funding coin‘, then choose Arbitrum and ETH

7. Type $11 of ETH and click on ‘SIMULATE DEPOSIT‘.

But if you notice a calculation mismatch in the amount (for example, receiving $8 instead of $11), simply use the remove icon and start again from the Explore page.

8. After depositing ETH, wait for 5 minutes and verify your task on Galxe.

Then, you can either withdraw your funds from the Portfolio page or proceed with the second task of $26 if you have sufficient funds in your wallet and wish to withdraw all at once.

Superform cross-chain >$25 Deposit Task

9. Visit https://app.superform.xyz/. On the Explorer page, scroll down and select ‘Optimism Chain and WETH‘. Click on ‘Deposit‘, then click ‘OPEN BAG‘.

10. Select Your Funding Token. Now, repeat the 7th step from above, but this time type $26 of ETH instead of $11.

11. Deposit via Arbitrum Chain ETH

12. After depositing, verify your Galxe task. Then, go to the Portfolio page and withdraw your funds.

If the ETH value displayed is less than the deposit amount, choose Optimism WETH instead of Arbitrum ETH when withdrawing funds.

Superform Safari Quiz Answers: Chapter 1

Question 1: Which of these will NOT be earned if you deposit on Superform during the Safari?

Ans. SHARDS

Question 2: How many SuperFrens of the same type and tier are required to forge?

Ans. 5

Question 3: What chain do SuperFrens live on?

Ans. Base

Question 4: Say your rank in a tournament is 4000. What tier SuperFren would you earn?

Ans. Silver

Question 5: What did early Superform users earn for competing in Tournament Zero?

Ans. Super-Chad NFT

By using this exchange and wallet, you can receive many airdrops, including Backpack, Tensor, USDC, and more. Recently, its users received a W airdrop based on trading volume.

The last snapshot was taken on April 6th, 2024. Start now to become eligible for upcoming airdrops.

Make sure to join our Telegram channel for the latest updates.

Backpack Exchange Referral Code 2024

Details of Backpack Exchange:

1. Official Twitter: @Backpack
2. Support: Telegram Support
3. Official URL: https://backpack.exchange/
4. Discord: https://discord.com/invite/backpack

Other Airdrops: Supra Airdrop